Conductive Adhesive Copper Tape Double Sided for EMI and RF Shielding
1. Product descriptio
The purity of copper foil is higher than 99.95%, and its function is to eliminate electromagnetic(EMI) interference,
isolate electromagnetic waves on the human body injury, avoid unwanted voltage and current without affecting functionality.
In addition, electrostatic discharge after the ground has a good effect.
Paste strong, good electrical properties, according to customer requirements cut into a variety of specifications.
| Specifications: |
| Item | Unit | Specification | Texting Standard | Texting Method | Others |
| Copper Thickness | um | 25 | 25+3 | | |
| Basis Weight | g/m2 | 160 | 160+10 | | |
| Width | mm | 25 | ±0.2mm | | |
| Copper Foil | % | 99.99 | 99.99 | | |
| Glue Thickness | um | 25 | 25+3 | ASTM-1000 | |
| Composition | ----- | | | | |
| Total thickness | um | 50 | 50+5 | | |
| Steel Adhesion | kg/1" | 0.8 | 0.8 | ASTM-1000 | Initial adhesion tester |
| Initial Adhesion | kg/1" | 1 | 1 | J.DOW | Electronic Stripping Tester |
| Rentention(cohesion) | kg/h | 48 | 48 | PSPC-7 | Viscosity Tester |
| Weather Resistance | ℃ | minus10-120℃ | minus10-120℃ | | |
| Inventory Condition | ----- | ----- | temperature:25℃ | | |
| RH:65% | | |
| Insulation Resistance | ----- | 0.01-0.06 | 0.01-0.06 | | Low dc resistance tester |
| Inventory Validity | | six month | | |
Feature:
It is an economical shielding product on the market, suitable for the isolation of connector shielding, wire and cable winding and electromagnetic shielding room. It can be bonded with any metal surface to complete the electric lap joint and gap electric closure.
The conductive performance of copper foil is superior, aluminum foil tape has thermal conductivity, chemical corrosion resistance,and the price is cheap.
3. Application
The copper foil taps products can be well used in many areas, such as EMI Shielding, RF Shielding, Guitar, Craft...
Packing Picture:
Copper foils tapes product can be packed with the roll and in carton case .
FAQ:
Q1. Can I have a sample order for lead glass?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Usually 5-7 working days.
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by Air and Sea.
Q5. How to proceed an order for lead glass?
A: Firstly let us know your requirements or size, thickenss and also quantity.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms.
Fourthly We arrange the production.
